Large MRSP Case
P/N: TMS931115

  • Container is O.D. Green rotationally molded virgin polyethylene with a front opening
        lid and black lusterless hardware.
  • Interior mounting rails accommodate the optional 7", 8" 9" or 10" deep drawers.
  • Stacking rib detents on the bottom of the case mate with the raised ribs on top of
        the case for solid palletization.
  • Security - Case also has anti-pilfer tabs to accept either leaded wire ties or flat
        security bands to insure integrity of contents.
  • Exterior dimensions are 32.6" wide x 24.4" deep x 30" tall.
  • Advanced composite container is designed with a front opening lid for easy
        access.
  • Container has a rugged, one-piece, seamless body and lid with black anodized
        valence.
  • Lid has 6 recessed half-turn latches for watertight seal.
  • Four full spring-loaded handles provide better balance.
  • Case is airtight and comes with an automatic pressure relief valve.
  • Ten containers per tier, stacked five cases tall per 463L pallet.

  •    Small MRSP Case
    P/N: TMS931117

  • Container is O.D. Green rotationally molded virgin polyethylene with a front opening
        lid and black lusterless hardware.
  • Interior mounting rails accommodate the optional 7", 8", 9" or 10" deep drawers.
  • Stacking rib detents on the bottom of the case mate with the raised ribs on the
        top of the case for solid palletization.
  • Case also has anti-pilfer tabs to insure integrity of contents.
  • Exterior dimensions are 32.6 wide x 24.4" deep x 18" tall.

  •    Optional Drawers for
        MRSP Cases
    P/N: TMS931119

  • Optional 7", 8", 9", and 10" deep molded polyethylene drawers are lightweight and
        will not corrode.
  • Each drawer has a gasketed-hinged lid, solid bearing slides rated for 100 lbs and
        a 12 compartment divider set.
  • Drawers are a one-piece seamless polyethylene design with ball bearing drawer
        slides and lightweight cover.

  •    Optional Drawer
        Dividers
    P/N: TMS931119-D

  • Optional Drawer divider ribs for locating partitions that can sub-divide the drawers
         into multiple compartments.

  • Large and Small Mrsp-closed
    Mrsp-lids off
    Heavy Duty Drawer Slides
    Mrsp-drawer open
    Mrsp-drawer open-top view
    Front Opening Recessed Latches
    Heavy Duty Handles
    Label Space
    Anti-Pilfer Tabs